Capacity from 7t to 300t
Excitation 9-36V DC
Embedded amplifiers 4-20mA
Customized dimensions
|
PARAMETER |
VALUE |
UNIT |
|
Standard capacities (Emax) |
7 to 300 |
Ton |
|
Supply voltage |
9 to 36 |
V DC |
|
Rated output-R.O. |
4-20 |
mA |
|
Zero balance |
0.5 |
±% of rated output |
|
Non linearity |
0.2 |
±% of rated output |
|
Hysteresis |
0.05 |
±% of rated output |
|
Non-repeatability |
0.05 |
±% of rated output |
|
Creep error (30 minutes) |
0.05 |
±% of rated output |
|
Zero return (30 minutes) |
0.1 |
±% of rated output |
|
Temperature effect on min. dead load output |
0.0026 |
±% of rated output/℃ |
|
Temperature effect on sensitivity |
0.0015 |
±% of rated output/℃ |
|
Compensated temperature range |
-40 to +80 |
℃ |
|
Operating temperature range |
-40 to +80 |
℃ |
|
Safe overload |
150 |
% of R.C |
|
Ultimate overload |
300 |
% of R.C |
|
Insulation resistance |
5000 |
Mega-Ohms |
|
Material |
Alloy steel |
|
|
Protection class |
IP67 |
|
|
Antiseptic paint |
C5-M |
|
The ZMBH is tension load cell alloy steel IP67 protected load cell. The capacity ranges from 2t-70t. It is widely used in crane scales. Features: Capacity 2t-70t High accuracy Easy installation Nickel plated alloy steel Optional features: Stainless steel construction
The ZMZL series tension sensors offer the highest accuracy, reliability, and durability in the industry. Utilizing a combination of stainless steel construction, a built in mechanical hard stop, and individual sensor performance verification, the ZMZL series tension sensors are perfect for all high performance running web applications. Features: Ca1
The ZMRC is rope clamp tension load cell measuring from 1t-20t. The load cell is easy to be installed with wire rope, which provides a simple way to measure weight in crane, hoist industry. The black printing is optional. Features: Capacity 1t-20t Rope clamp tesnion measure Easy to install Nickel plated alloy steel Optional features: Black pr1
The ZMME-L is large capacity in line threaded load cell, used for both tension and compression. The load cell is constructed with nickel plated alloy steel, with good stability. The rated capacity ranges from 100KN-6000KN, widely used in crane and weighing industry. Features: Capacity 100KN-6000KN Two sides thread mounting Nickel plated1
The ZMLCS load cells measure both tension & compression load force. Applications include performance testers for automotive industry. Features: Capacity 500kgf-300tf Compression and tension In-line thread tyoe Alloy steel construction Optional features Customizable dimensions
The ZMQS is double ended shear beam load cell, capacity from 1t up to 30t. The load cell has high accuracy and high stability, widely used in elevator industry. Features: Capacity 1t-30t High accuracy High stability Nickel plated alloy steel Optional features: Stainless steel construction
The ZML2 is large force capacity pancake or spoke type compression load cell, capacity from 100t up to 1000t. The load cell is widely used in universal testing machine and construction force measure. Features: Capacity 100t-1000t High accuracy High stability Nickel plated alloy steel Optional features: Stainless steel construction
ZMDN is a high-precision rotarting torque sensor. The max rotating speed that the sensor can accept is 3000rpm. The output signal of ZMDN is from 1.0-1.5mv/v. Analog transmitter 4-20mA, 0-5V, 0-10V is optional. Features: Capacity 0.1Nm-500Nm Carbon brush touchable torque sensor Max 3000rpm Stainless steel body Optional features: 4-20mA, 0-5V, 0-10V1
We will contact you as soon as possible !
Address
No.712 Lao Shan Road, Bengbu, Anhui Province, China
Friendly Links :
IPv6 network supported Scan to wechat :
