Double ended shear beam load cell

Weighbridge load cells also known as truck scales are designed for truck and rail scales. The ZMHBQ is common product widely used around the world.  The ZMHBQ is very cost-effective with C3 class. In most of situations, they are used at 4,6 or 8 numbers together, so their sensitivity must be exact same. Features: Capacity 10t-50t High accuracy1

The ZMQS is double ended shear beam load cell, capacity from 1t up to 30t.  The load cell has high accuracy and high stability, widely used in elevator industry.  Features: Capacity 1t-30t High accuracy High stability Nickel plated alloy steel Optional features: Stainless steel construction

The display uses a 24 bit A / D converter, can be connected to various types of sensors and transmitters to achieve the pressure, flow, level, composition analysis and volume measurements, and other physical and mechanical parameters, display, alarm monitoring, data acquisition and recording. Functions: Relay(1,2,3) Amplifer 4-20mA, 0-5V Modbus RTU1

Weighing indicator XK3190-T6 is widely applied in electronic platform scale, electronic floor scale and so on alike static weighing system equipped with 1~4 load cell. Features: Low energy consumption design High precision Σ-Δ conversion,high PPR Typical function, easy operation Auto power off at low battery Optional features: RS232 interface

The ZMSAA S type tension load cell offers a wide range of capacities, extending from 10kg to 300kg. Constructed from alloy steel with an electroless nickel-plated surface, it’s a robust and reliable choice. We provide optional amplifer which converts analog sigal into 4-20mA, 0-5V or 0-10V.  Features: Capacity 10kg-300kg High accuracy S beam s1

Weighbridge load cells also known as truck scales are designed for truck and rail scales. The ZMHBQ is common product widely used around the world.  The ZMHBQ is very cost-effective with C3 class. In most of situations, they are used at 4,6 or 8 numbers together, so their sensitivity must be exact same. Features: Capacity 10t-50t High accuracy1

The ZMNJF2 is a non-rotating type torque transducer that converts a torsional mechanical input into an electrical output signal. The ZMNJF2 can be used in both clockwise and counterclockwise direction ranging from 1000Nm up to 5000Nm. The sensor is used in static and non-rotating torsion measure applications. Features: Capacity 1000Nm-5000Nm Static1

The ZMZS coulmn S type tension load cell offers a wide range of capacities, extending from 1KN to 200KN. Constructed from alloy steel with an electroless nickel-plated surface, it’s a robust and reliable choice. We provide optional amplifer which converts analog sigal into 4-20mA, 0-5V or 0-10V. Features: Capacity 1KN-200KN S beam structure with hi1